Manual Sack Opening System

Manual Sack Opening System (Bel-Tyne)

Products from Morray Engineering

Manual Sack Opening System (Bel-Tyne)

Products from Morray Engineering

It allows the manual opening and disposal of bagged material under dust controlled conditions.

The Bel-Tyne Manual Sack Opening Units allows the manual opening and disposal of bagged material under dust controlled conditions, with the added feature of an integral automatic waste bag compaction. The units can be attached to many types of ancillary equipment, e.g. screws, disk lifts etc.

General Method of Operation
The operator opens the fully hinged, front opening door and places the bag onto the bag support grid. The bag on the support grid is cut manually by the operator and the contents of the bag discharged down a feed chute beneath the bag support grid.
When empty, the waste bag still inside the unit, is discharged by the operator to the rear, where it is automatically compacted into a waste receiving plastic bag. An integral dust extraction unit can be fitted from which pulsed materials are fed back into the system.

About Morray Engineering

Morray Engineering

Morray Engineering

Bagging, heat sealing/stitching, conveying, sack automation, sack emptying, IBC filling/discharging, robotic palletising.

Braintree, Essex, United Kingdom

.P-CTA-345915078-345915097