Get in touch with companies directly

Non-contact infrared thermometer (PCE PCE-888)

  • Designed for inspection and maintenance of heating systems, ventilation systems, and air conditioning units.

Request information


There was an error and the information has failed to send.Unable to send part of the information, please try again.
Please try again

Detailed information about the product Non-contact infrared thermometer

The PCE-888 pyrometer is ergonomic and easy to carry from one place to another. This light infrared pyrometer is attractive due to its size and its accuracy which derives from its visible laser pointer.

The pyrometer was designed for industrial use and for professionals working in inspection and maintenance of heating systems, ventilation systems, air conditioning units, in the automotive industry, for electrical systems and fuse boxes, as well as for pilot installations and test positions.

The pyrometer can be used in adverse conditions. It has a backlit LCD. The device has a visible laser to quickly and accurately target the area to be measured. This allows for measurements to be taken at certain distances if the object being measured it hot or difficult to access. The emissivity can be adjusted between 0.1 and 1, and covers 90% of possible measurements taken.

Please note that when measuring an object, the surface area being measured must be bigger than the surface area of the visible laser pointer. To decrease the size of the laser pointer, the distance between the object and pyrometer must be decreased.

  • Large backlit LCD with 3.5 digits showing a maximum value of 1,999
  • Shows readings in °C or °F
  • Auto shut-off after 7 minutes of inactivity
  • Retains current values
  • Good ratio between distance and point of measurement of 16 : 1 (approximate diameter of measurement point: 25mm at a distance of about 40cm, 50mm at 80cm, 100mm at 1.6m and 200mm at 3.2m)
  • Includes battery and user's manual
  • Pre-installed mount for tripod

Contents: PCE-888 pyrometer, battery, carrying case and user's manual

Measurement range -50 to 550°C
Resolution 0.1°C (between -50 and 200°C) 1°C (between 201 and 550°C)
Accuracy ±5°C at -50 to -20°C, above range ±1.5% of readings ±2°C
Response time <500ms
Measurement rate 2.5 times per second
Ambient temperature range 0 to 50°C
Power 9V battery
Dimensions 230 x 56 x 100mm
Weight 290g
Measurement point (ratio of distance to size) 16 : 1
Emissivity (variable) 0.1 to 1
Laser pointer visible laser point
Laser class II (output <1mV, wave length of 630 - 670nm)
Backlit LCD yes
Other products of this company