Communications DPI1 has an Ethernet port with a 100Base-T LAN8720 chip and two network state indicators. It has two channels that support 250 DPDs/channel with a total of 500 DPDs. The interface is easy to assembly, it can be inserted into a DIN-5 and using standard network cables it can be connected to the displays.
IP configuration It is possible to manually override the addresses of TCP/IP using its integrated keypad:
Backup DPI1 has a slot to insert a SIM card. This card is used to make a backup of the network properties and configuration.
Screen The screen allows Ethernet configuration operations and diagnostic.
Web Server The DPI1 does not require an external software. The configuration, maintenance and diagnosis is done through a web browser.
Individual Test: This utility allows you to view a specific DPD and check if all functions, switches and output devices are working properly.
Global Test: map the connected nodes, check for errors or failures, test the entire system by sending texts, lights and alarms.
Configuration: reassign the network Id of a node, set the default language, configure the interface IP parameters, among others.
Digital output DPI1 features 3 configurable digital outputs for signaling: active picking, slope picking and system alarms.
Our company was established in 1995. Since then we have been entirely focused on systems design and facilities that range from chemicals and pharmacy to handling and logistics.