Home → Warehouse Equipment & Installations → Docks, Doors, Shelters & Industrial Ramps → Industrial Doors → Sectional Doors

Sectional Door

Sectional Door
  • Brand: Hörmann
  • Model: TAR 40
Supply and fit door with aluminium frame construction and large areas of glazing (type-tested in accordance with EN Standards).

 
Click here to request information and/or a quote

Detailed information about the product Sectional Door

  • Door leaf:
    Hörmann Sectional Door Type TAR 40, aluminium frame construction with thermal breaks and large areas of glazing, uniformly spaced.
    Door sections with frame construction of aluminium extrusions, in the standard version, anodised to DIN 17611 stained in a natural colour (E6/EV1), with aluminium glazing bars on the inside, incl. infills.
    Door sections with finger-trap protection (European Patent), effective inside and outside.
    Bottom door section with double chamber, hollow profile seal with double lip as bottom seal, top door section with lintel seal. Seals made of EPDM.
  • Surface:
    Door sections anodised to DIN 17611 and stained in a natural colour E6/EV1. All other structural components hot galvanised.
  • Tracks:
    Track application N (normal tracks). Weight counterbalanced by a torsion spring assembly sited behind the lintel, with torsion springs coated in Silver Grey (based on RAL 7001).
    With cable drums and carrying cables at the sides. The door sections are parked behind the lintel, horizontally within the room. Door safeguarded against crashing to the floor in the event of torsion spring failure through the use of TÜV-tested safety structural components.
  • Frame:
    Angled frame to two sides, in hot galvanised sheet steel with hand guards at the sides, with vertical, screw-on, replaceable safety tracks. Lateral seal with additional sealing lip. Horizontal, sturdy twin track (up to 5000mm door height) or as single track with C-profile reinforcement (from 5010mm door height), with track supports up to 1500mm long.
  • Glazing:
    1 door section of aluminium extrusions with thermal breaks, infills insulated with PU foam, both sides with stucco-design Aluman sheet covering (26mm thick).
  • Door lock:
    Internal operation by means of a shoot bolt (when engaged, cannot be dismantled), rotary latch with patented latching spring disc or ground lock.
  • Door operation:
    Door operation via one handle on the inside or by means of a hand rope (up to and including door height 3500mm) or pull pole (from door height 3510mm).
Click here to request information and/or a quote