Home → Warehouse Equipment & Installations → Docks, Doors, Shelters & Industrial Ramps → Industrial Doors → High-Speed Roll-Up Doors

Rolling Shutter

Rolling Shutter
  • Brand: Hörmann
  • Model: HR 120 aero®
Single-skinned rolling shutter made of coated aluminium profiles, with ventilation area of approx. 30%.

 
Click here to request information and/or a quote

Detailed information about the product Rolling Shutter

Single-skinned rolling shutter made of coated aluminium profiles, with ventilation area of approx. 30%, wind pressure resistance to DIN 1055, part 4, with deflection-resistant bottom profile featuring a flexible hollow section seal with lip, height-adjustable galvanised support brackets, with Hörmann ZAK® gear system. PUR seal between building structure and side guide. With lintel seal and primed barrel.
  • Size:
    5000 x 3000mm (width x height)
  • Profile:
    HR 120 aero®, aluminium
  • Surface:
    Outside RAL 9002 white, inside protective paint
  • Operator:
    Direct drive operator 400V 3-phase current, IP 54, emergency crank handle to ZH 1/494 pt. 4.4.3 and integral safety device, TÜV-tested, maintenance-free.
  • Control unit:
    A70R vario with 24V control voltage, safe extra-low voltage, protection category IP 65, with "OPEN-STOP-CLOSE" pushbutton on the control unit cover, lockable, with opto-electronic closing edge safety device.
  • Fitting:
    Behind the structural opening, on concrete, off-loading assistance available on site.
Click here to request information and/or a quote