Home → Packaging → Packaging Machinery → Wrapping Machines

Automatic Wrapping Machine

Automatic Wrapping Machine
  • Brand: DNC®
  • Model: Line
DNC's most versatile fully automatic pallet wrapping machine; reinforced frame especially designed to withstand load weight.

 
Click here to request information and/or a quote

Detailed information about the product Automatic Wrapping Machine

DNC®'s Line Fully Automatic Stretch Film Wrapping Machine is DNC's most versatile fully automatic pallet wrapping machine. The basic structure is a reinforced frame which contains a large bearing, especially designed to withstand the weight of the roller turntable and load. The mast, which also contains the electric control unit, is coupled to this frame, a sturdy track along which the film carriage travels.

The Line model is fully automatic. It is controlled by means of an LCD display, where all the working parameters can be programmed and the general status can be checked. The turntable is fitted with a roller conveyor for automatic infeed and outfeed of palletised loads. The load is conveyed to the roller turntable. After positioning, an automatic device applies the film onto the load, meanwhile, the turntable begins gradual rotation until the preset speed is reached. The carriage begins its ascent and descent at the programmed speed, carrying out the preset number of reinforcing wraps. Once the wrapping cycle is over, the turntable progressively slows until the home position is reached. The cutter arm then advances and the film is cut and pressed against the load. The load is outfeed and the system is then ready for a new cycle.

Standard Features:
  • Interfacing for coupling infeed and outfeed lines.
  • Turntable fitted with roller conveyors.
  • Siemens S7 200 PLC Control.
  • Harmonic suppresor line filter.
  • Different wrapping modes, manual override, etc. through LCD control display.
  • Soft start and adjustable turntable speed.
  • Adjustable carriage speed.
  • Counter for wrapped loads, film consumption, etc.
  • Automatic load height detection by photocell.
  • Different wrapping programs, manual override, etc.
  • Powered film prestretch (fixed ratio type: supplied with 4 sets of gears).
  • Automatic film gripper and cutting arm.
  • Hot wire film cutting system.
  • Menu for counting processed pallets, film consumption, etc.
  • Automatic film gripper and cutting arm device.
  • Special non-wrapping through passing cycle.
Options:
  • Powered top hold-down plate for load stabilizing.
  • Film tail hot seal (with or without dolly, or lineal).
  • Sliding knife film cutting device.
  • Fully automatic top sheet dispenser (cabinet shared).
  • 90° infeed/ outfeed configuration.
  • Different load sizes.
  • Chain conveyors.
  • Infeed/outfeed powered roller conveyors, 1500 x 1300mm.
  • Safety interlocked fencing needed to meet CE standards.
  • Special muting safety light beams.
  • Film narrower.
  • Other specifications upon request.
Click here to request information and/or a quote